Portwest Bizflame™ Anti-Static Coverall
Portwest Bizflame™ Anti-Static Coverall
Conforms to EN ISO 11612 A1 + A2, B1, C1, E2 and F1. EN ISO 11611 class 2, A1 + A2. EN 11449-5. IEC 61482-2 IEC 61482-1-2 class 1. ASTM F1959/F1959M-12 APTV=13.6 CAL/CM2. Flame resistant finish. UPF 50+. Flame resistant hi-vis tape on shoulders, arms and lower legs. Concealed two way front metal zip with stud closure. Two radio loops. Pen pocket on left arm. Two slanted, concealed chest zip pockets. Partially elasticated waistband. Two side pockets. Rear pockets with stud flap closure. Adjustable cuffs. Ruler pocket. Knee pad pockets. Triple stitched seams. Branding on left arm and right thigh.
Artwork Guidelines
To help us achieve the best possible print quality, please follow the artwork guidelines below before uploading your design.
- 850mm Pull Up Banner Finished Size: 850 × 2000mm Artwork Size: 850 × 2100mm Visible Area: 850 × 2000mm Bottom Cassette Allowance: 100mm (will roll inside the base and will not be visible) Bleed: Not required
- 1000mm Pull Up Banner Finished Size: 1000 × 2000mm Artwork Size: 1000 × 2100mm Visible Area: 1000 × 2000mm Bottom Cassette Allowance: 100mm (will roll inside the base and will not be visible) Bleed: Not required
- Artwork Requirements Supply artwork as a PDF wherever possible. Create artwork at full size. Use a minimum resolution of 150dpi at full size (300dpi preferred for photographs and detailed graphics). Convert all fonts to outlines or embed fonts. Embed all linked images. Use CMYK colour mode for the most accurate print results. Keep important text, logos and graphics at least 20mm from the edges of the visible area. Do not place important content within the bottom 100mm, as this will be hidden inside the banner cassette.
We will check your artwork and send a digital proof for approval before production begins.
Need help preparing your design? Upload what you have and we’ll contact you if any changes are required.